Marathon Sprint Series Betriebsanleitung PDF herunterladen (Seite 23)

Deleting a channel from the radio

receiver

• Press setting button (1) and keep pressed

- press 1x for channel 1; LED (3.1) lights up

- press 2x for channel 2; LED (3.2) lights up

- The LED that lights up depends on which channel has been select-

ed. After 5 seconds, the LED starts to flash and then remains lit after

a further 10 seconds.

• Release setting button (1) - deletion process complete

Deleting the radio receiver’s

memory

If a manual remote control is lost, then for security reasons all channels on

the receiver have to be deleted! After this has been done, all the manual

remote controls have to be re-set into the receiver.

• Press and hold the programming key (1).

- After 5 seconds, the LED (3.1 or 3.2) flashes. After another

10 seconds, the LED is constantly on (3.1 or 3.2).

- After 25 seconds, all LEDs are on (3.1 + 3.2).

• Release the programming key (1) - all channel data has been deleted.

Connecting an external aerial

• An external aerial can be fitted if the possible range with the radio receiv-

er's internal aerial is insufficient.

• The aerial cable must not exert any mechanical load on the radio receiv-

er. Fit strain relief.

• Connect external aerial (6) to terminal (4).

What is push-button 2 used for?

Defined opening and closing (2-channel operation)

Should this function be used, a 2nd push-button can be connected. For set-

tings see 'Additional Functions' section. This enables the door to be opened

using one push-button, and closed using another.

Operation and Handling

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 34 35

Keine Kommentare

Marathon Sprint Series Betriebsanleitung Seite 23