Marathon Sprint Series Betriebsanleitung PDF herunterladen (Seite 12)

• Push bogie truck (1) onto C-rail (2).

• Slot two C-rails (1) into connecting element (2) and push together as

far as they will go.

• Hook tensioner (1) in chain (2) and turn it 90°. Insert connecting

element (6) and push tensioner (1) through it. Place plain washer (5)

and spring (4) onto the tensioning bolt (3) and screw it into the

tensioner (1).

• Tighten chain until the mark (arrow) is reached.

• Do not tighten on this side, as the unit is supplied pre-tensioned.

6 7

10mm

90°

Selection of installation option

Select the desired installation option. For option (B), change the

position of power supply unit.

Caution for sprint and duo!

The plastic chain case is not packaging - do not remove!

Pre-assembly for installation

options A/C

Dispose of packaging material according to the applicable

statutory regulations.

• Remove the operator from its packaging.

• Release the switch trigger (1) and move it in the direction of the

arrow. Open the chain case (2).

• Slide the trolley (1) onto the chain (2) with the chain case (4). The

chain (2) engages in the chain wheel (3). If the chain wheel (3) does

not turn, pull the emergency release (N) once. The chain wheel (3) is

released.

7 7

Installation duo

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

Keine Kommentare

Marathon Sprint Series Betriebsanleitung Seite 12