Marathon Sprint Series Betriebsanleitung PDF herunterladen (Seite 20)

Commissioning

Checking emergency release

With sectional doors, or doors with ceiling guides, you have the

option of activating the backjump with DIP switch 6 in order to

offload the operator and door mechanisms.

• Close the door with the drive.

• Pull the emergency release (N) 1x.

If the emergency release cannot be operated, loosen the end switch

(V) and move it in direction (1).

• Open the door with the drive and close it again. Test the emergency

release again.

Checking force setting

Whenever the door is opened or closed, the control unit compares the

memorised force setting with the force actually needed and automatically

adjusts the memorised setting accordingly when the given final travel

position is reached.

For checking details see 'Maintenance and Care' section.

Programming of remote control

Prior to the initial programming of the hand-held transmitters,

clear the memory of the radio receiver.

Clearing radio receiver memory

• Press and hold the programming key (1).

- After 5 seconds, the LED (3.1 or 3.2) flashes. After another

10 seconds, the LED is constantly on (3.1 or 3.2).

- After 25 seconds, all LEDs are on (3.1 + 3.2).

• Release the programming key (1). All channel data has been

deleted.

Programming the radio transmitter

• Press the programming key (1)

- 1x for channel 1; LED (3.1) is on

- 2x for channel 2, LED (3.2) is on

- If no other code signal is transmitted within 10 seconds, the radio

receiver switches to standard operation.

- Aborting programming: repeatedly press the programming key (1)

until all LEDs are off.

• Press and hold desired hand-held transmitter key (5) until the LED

(3.1 / 3.2) is off (depending on the selected channel).

• The LED is off - the programming process is completed.

The hand-held transmitter has transmitted the radio codes to the

radio receiver.

3.1

3.2

3.1

3.2

Continue with programming the other hand-held transmitters. To do this,

repeat the above steps. The maximum number of memory blocks is 112

per radio receiver.

Attaching instruction label

• Attach the instruction label for the operation of the emergency

release to the emergency release rope.

Attaching warning sign

• Attach the warning signs (text + triangle sign) at a position where

they are clearly visible, e.g. beside the push-button (warning triangle)

and on the door leaf (text + warning triangle).

46502V000-172006-0-OCE_Rev.A

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare

Marathon Sprint Series Betriebsanleitung Seite 20

Kommentare zu diesen Handbüchern