Marathon FTvirtual Server Bedienungsanleitung PDF herunterladen (Seite 14)

10 Endurance FTvirtual Server Release Notes

SCSI and RAID controllers in the right hand pane.

• From the menu bar, select Actions Scan for hardware changes. Any newly available

redirected devices will become available to the FTvirtual Server.

Endurance Manager

• The Endurance Manager 5.0 or 5.0.1 is not compatible with Endurance FTvirtual Server

Version 6.0, or greater, and will not connect to a Endurance FTvirtual Server Version 6.0,

or greater, configuration.

• Only the local Endurance Configuration may be managed when running the Endurance

Manager on a CoServer or an FTvirtual Server environment. It is not possible to connect

to and manage a remote Endurance Configuration when running the Endurance Manager

on a CoServer or an FTvirtual Server environment. You must install the Endurance

Manager on a remote client in order to manage remote Endurance Configurations.

• If you change the IP address on the FTvirtual Server or a CoServer, it is necessary to stop

and restart the Endurance Management Service. Failure to do so results in the inability to

connect from a remote Endurance Manager.

• A user who is logged in to an account with a temporary user profile, such as the Guest

account, will not be allowed to execute privileged functions from Endurance Manager.

These accounts have "read-only" access to Endurance Manager functions.

SAN Configuration Limitations

If both CoServers have LUN's on the same SAN storage subsystem, and access to that

subsystem fails completely, both CoServers may reboot causing the FTvirtual Server to be

rebooted.

LUN's used by CoServer1 should be on different SAN subsystems from LUN's used by

CoServer2.

Dynamic Disks

Endurance supports the use of dynamic disks. To use dynamic disks with the Endurance

software, the following guidelines apply:

• Use a basic disk for the FTvirtual Server boot disk. Some Windows resource kit items may

not support dynamic disks.

• Initialize all disks as basic disks on the CoServers.

• Use the Windows Disk Manager in the FTvirtual Server to create or update dynamic disks

and to write the disk signature for disks other than the FTvirtual Server boot disk.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Marathon FTvirtual Server Bedienungsanleitung Seite 14